Yangzhong Jilong Steel Grid Bridge Factory

High quality product, professional service, being the core supplier in industry!

Home > News > Content
Aluminum Alloy Walking Wire Frame Common Accessories
- Jul 11, 2017 -

Two-hole connector: For aluminum and aluminum profiles between the right angle connection, the small corner of the two corners will be stretched into the concave section of aluminum, and then with a special screw nut can be tightened.

Single-hole Connection: For the connection between aluminum and the wall or the ground, the end of the opening with a 8th-number expansion bolt fixed, and the other end of the profile of special screw nuts can be tightened.

Three-hole connection: A reinforcement connection or ceiling connection for a walking wire frame.

Four-hole straight plate: For the horizontal connection between aluminum and aluminum profiles, insert the product into the groove of two aluminum profiles which need to be horizontally connected, then tighten the screws.

U-Type bracket: When the wire frame is used as the derrick, the product is used for the connection between the aluminum alloy hanger rod and the walking wire frame.

Aluminum hanger rod Top Fixed part: When the aluminum alloy walking wire frame uses the aluminum concave profile as the hoisting rod, this product is used for connecting the hanger rod and the top fixed.

The top fixed piece of the Wire hanger rod: When the aluminum alloy walking wire frame adopts the threaded rod as the hanger rod, the product is used to connect the wire hanger rod and the fixing of the top.

Wire Hanger Rod Bracket: When the aluminum alloy walking wire frame adopts threaded rod as the derrick, this product is used for the connection between the wire hanger bar and the walking line frame.